UNOFIX MRN 100 - PU D4 Marine Adhesive
UNOFIX MRN 100 is a single-component PU D4 adhesive for demanding indoor and outdoor bonding. It resists water, moisture and weathering while filling small gaps.
UNOFIX MRN 100 is a single-component PU D4 adhesive developed for strong bonding on wood, metal and concrete. It spreads homogeneously across absorbent and non-absorbent surfaces and supports structural wood assembly, furniture manufacture and repair.
After curing, the adhesive delivers high heat and water resistance, with controlled expansion for gap filling. It is suitable for indoor and outdoor use and offers practical handling with low consumption compared with equivalent products.
Amber, viscous liquid appearance
Open time: 15–25 minutes at 20–23°C
Full curing: 24 hours at 25°C and 50% RH
Recommended application temperature: 15–30°C
Key Benefits
- Single-component, user-friendly application
- Resists water, moisture and weather conditions
- Strong adhesion to wood, metal and concrete
- Fills small gaps with controlled expansion
- High heat and water resistance after curing
- Low consumption compared with equivalent products
Features
- PU D4 marine adhesive
- Homogeneous spread on absorbent and non-absorbent surfaces
- Density: 1.09 ± 0.05
- Viscosity: 9000 ± 3500 mPa·s at 25°C
- Available in 500 g, 1 kg, 5 kg, 8 kg and 30 kg packs
- Nine-month shelf life when stored sealed at 10–25°C
Specifications
| Colour |
Amber
|
|---|---|
| Viscosity (20°C) | 10000 ± 100 cp |
| Shelf Life (Month) | 9 |
| Density | 1.09 ± 0,02 g/cm³ |
| Adhesive Technology | Polyurethane |
- Lead time
- 5–14 days
- Country of origin
- Türkiye
- SKU
- UNO-MRN-100
Related
Furniture Industry · Membrane Press Adhesives
UNOFIX MVP 150 - Membrane Press Adhesive
A polyurethane dispersion based adhesive for membrane vacuum pressing. Use it as a single component or as a two-component system for higher heat resistance.
